SALES/PROMOTIONS
IMTS
SPECIALS
IMTS is September 14th-19th 2026.
We are starting early with promos, sales and specials for your shops, trade programs and manufacturing firms. Stay Tuned as we continue to add the specials to this page!
It's not too early to get your savings!
GANESH SPECIALS
Ganesh: GHT-618 EVS
$39,990.00
This Ganesh lathe comes with plenty of extras. The GHT-618 EVS High-Accuracy Toolroom Lathe features extremely accurate angular contact ABEC class -7 (P4) ball bearings for extreme spindle accuracy. It has a 5C Collet Spindle with Spindle runout less than 80 millionths.
3-horsepower Electronic Variable Speed inverter-drive spindle motor for a broad usable speed range.
Infinitely Variable Speeds: 130 to 4,000 RPM with digital spindle speed readout and spindle load meter.
Dual range inch/metric gear box in oil bath with site gauge on apron.
More Quality Features:
-
Dual Reading inch/metricl position indicator dials on all axis.
-
Turcite-B bearing surface between carriage and the bed for increased wear resistance and improved accuracy.
-
Thread length control stops with fine trip-out adjustment.
-
Independent 75-Watt Bodine Electric feed motor for carriage and cross slide feed.
-
Bellows cover for the lead screw to minimize contamination of the leadscrew and nut.
-
Hardened and Ground Bedways to Rockwell 58Rc.
-
One-shot lubricator for carriage and cross slide ways and gib surfaces.
STANDARD ACCESSORIES INCLUDED WITH EACH GHT-618 EVS:
That's A
$2,000 Value
-
5C Collet Quick-Action Producton-Style Collet Closer.
-
Coolant and Chip Sheild.
-
Tool Box and Tool Kit & One Adjustable Height Tool Holder.
-
Test Bar & Touch up Paint & 64-collet Storage Wheel.
-
Operation Manual & Parts List.
-
Leveling Pads & Bolts.
-
Halogen Work Light.
SPECIFICATIONS:
-
Work Holding Capacity:
-
W/Round 5C Collets: 1-1/16" (27mm).
-
W/Hex 5C Collets: 7/8" (22mm).
-
W/Square 5C Collets: 3/4" (19mm).
-
W/Expanding Collets: 3" (76mm).
-
W/Step Chucks: 1-1/16" to 6" (27 to 152.4mm).
-
W/ 3 & 4-Jaw Chucks: 5" (127mm).
-
-
Machine Capacity:
-
Swing over bed: 11" (280mm).
-
Swing over carriage: 9" (228.6mm).
-
Swing over cross slide: 6" (152.44mm).
-
Distance between centers: 18" (457mm).
-
Tailstock quill: MT #2
-
Main Motor: 3-HP, 220 vac. 3-phase, 20 amps, single phase 35-amp service.
-
Coolant Pump: 1/8-HP, 220 vac., 3-phase (With coolant nozzle & flow control valve).
-
-
Machine Travels & Specifications:
-
Cross slide travel: 7.5" (190.5mm).
-
Compound slide travel: 3" (76mm).
-
Quick action compound slide motion: 0.1" (2.5mm).(for thread pull out).
-
Tailstock Quill Travel: 3-3/4" (95mm). features inch & metric quill graduations.
-
Inch Threads (36). 11-108 TPI Threading gearbox selectable w/o change gears.
-
Metrick Threads (36) 0.675-11mm. ThCreading gearbox selectable w/o change gears.
-
Carriage slide powerfeed range: 5/16"-7". (8 to 178 mm).
-
Crosslide powerfeed range: 3/16"-4" (5 to 102 mm).
-
Net Weight: 1.804 lbs. (818 Kg.).
-
Machine shipping dimensions: L x D x H: 74" x 30"x 66" (1,880 mm x 762 mm x 1676 mm).
-
CUSTOMIZED MACHINE OPTIONS:
-
Taper Turning Attachment Installed. (Factory Order).
-
Steady Rest
-
Follow Rest.
-
Factory machine installation: "Peace-of-Mind Factory Installation" -includes expenses.
-
2-Axis Newall Premium DRO-installed.
-
Micrometer Carriage Stop with Bracket.
WORK HOLDING OPTIONS:
-
Live Center, MT-2.
-
Precision 5C 16-piece Collet set. 1/8" -1-1/16" x 16ths.
-
6" Precision ZERO-SET 3-jaw scroll chuck w/top reversible jaws & back plate.
-
6" Precsion ZERO-SET 6-jaw scroll chuck w/top reversible jaws & back plate.
-
Drill Chuck and Arbor.
TOOLING OPTIONS:
AXA Quick-Change Toolpost & 4-toolholders installed.
GANESH
GTW-26
Precision Lathe Series of Gear- Head Lathes
IMTS SPECIAL!
26" Swing over Bedways, 40" -160" Between Centers
Ganesh is offering this powerful gear-head lathe series as part of their IMTS Specials. Ganesh went the distance to build a gear-head lathe worthy of your toughest applications. See the quality that is built right into these gear-head lathes.
These features are included with each machine:
-
Steady Rest with Roller Bearings- Capacity 4" -12"
-
Follow Rest.
-
Full-Length Back Splash Guard.
-
Chuck Guard with Safety Interlock Switch.
-
Foot Brake.
-
Halogen Work Light (55 Watts).
-
Machine Leveling Pads & Operating Hand Tools.
Pricing for Each Machine:
-
GTW-2640 Heavy-Duty 26" x 40" Engine Lathe: $39,990.00
-
GTW-2660 Heavy-Duty 26" x 60" Engine Lathe: $44,990.00
-
GTW-2680 Heavy-Duty 26" x 80" Engine Lathe: $49,990.00
-
GTW-26100 Heavy-Duty 26" x 100" Engine Lathe: $59,990.00
-
GTW-26120 Heavy-Duty 26" x 120" Engine Lathe: $69,990.00
-
GTW-26160 Heavy-Duty 26" x 160" Engine Lathe: $79,990.00
The Construction is made of high quality castings made from fine grain high-density cast iron using the superior Meehanite process to provide superior strength and vibration dampening for improved surface finish and extended tool life.
-
Induction Hardened 52Rc & Precision Ground oversized Turcite-B Anti-Friction coasted Bed Ways.
-
Gap-Bed with 33-1/4" swing clearance for added workpiece capacity in the 6.5" wide bed gap.
The Headstock: The headstock has a 15-HP spindle motor for efficient metal removal capabilities.
-
Hardened & ground D1-11 Camlock spindle.
-
4-1/8" spindle bore.
-
3-bearing spindle -2x NSK 32030 Tapered Roller bearings, and 6026 rear ball bearing.
-
12-speed geared-headstock with 15-1,200. rpm spindle speeds.
-
Alloy Steel Hardened & Ground Headstock Gears.
-
Safety gated spindle control lever to protect from accidental engagement.
-
Chuck guard with safety interlock switch.
-
Footbrake provided for added safety and operational convenience.
Axis Feed Drive:
-
Longitudinal Rapid Traverse Positioning for enhanced operator efficiency.
-
Extended Cross-Slide travel of 14.9" (380 mm) is provided.
-
Inch/metric, diametral & modular threading capacity without the use of the change gears.
-
A thread dial indicator is included with the machine for inch & metric thread cutting.
-
Dual inch/Metric cross feed, compound, and longitudinal position indicator dials.
-
Safety overload clutch for feed shaft to protect gearing from overloads.
-
Lead Screw Safety Torque Limiting device as well as a shear pin for lead screw.
-
The automatic feed mechanism is mechanically interlocked with the thread cutting engagement lever to prevent damage though simultaneous engagement.
-
The fourth rod controls a 4-position automatic feed stop which disengages the longitudinal feed motion at 4-adjustable pre-determined positions.
Machine Features:
-
Automatic way lubricaton with filtered pressure lubrication system.
-
The electrical control box and coolant system are equipped with electro-magnetic contactors and overload relay protection devices to ensure safe operation.
-
The tailstock features 2-speed quill advance for efficiency and ease of operation.
-
The quill is oversized and equipped with a tang-drive and a drift-slot to make removing the centers and taper shank drills very without damage to the quill face.
-
Flood coolant system is included.
-
A toolbox and tool kit with grease gun and touch-up paint is included with the machine.
-
Inspection Report on accuracy to CNS 94 and B7001 standards included.
-
Instruction Manual, Tools and Toolbox with hand tools and lube gun included.
-
One-Year Limited Parts and Labor Warranty Included.
-
Large compliment of parts and accessories stocked in USA to ensure continued operation.
Your Options:
Customized Machine Options:
-
Factor machine Installation: " Peace-of-Mind Factory Installtion" -includes expenses.
-
Taper Attachment -Factory Installed.
-
Wiring for 440-Volt input voltage.
-
Lead Screw Cover-Factory Installed.
Chuck Options:
-
12" 3-Jaw Chuck, D1-11 Direct Mount.
-
16" 4-Jaw Chuck, D1-11 Direct Mount.
Tooling and Workholding Options:
-
Heavy-duty Steady Rest- 3" -8" capacity w/ Roller Bearings.
-
Heavy-duty Steady Rest- 8" -15" capacity w/Roller Bearings.
-
Live Center MT-5
-
Dorian Quick-Change Wedge-Type DA size 4" wide toolpost and 4-toolholders:
-
2 ea. Turning/Facing toolholder, 2 ea. Boring/Turning/Facing toolholder.
-
GTW-26 SERIES:
Machine Specifications:
ACER 3VS-II
ACER'S BEST SELLING MILL
We feature the ACER 3VS-II because of the value, price and performance can't be beat. We sell a lot of them because of their quality.
This mill starts at just $12,600.00 for the base model and is packed with features and plenty of options.
FEATURES:
-
3 HP Spindle Motor & Precision R8 Spindle w/ABEC-7 Bearings.
-
Large Digital Spindle RPM Display.
-
The Spindle is designed to stay inactive after the power is restored from a power failure.
-
Chrome Plated & Precision Ground Spindle Quill
-
Hardened & Ground Dovetail Ways & 3-Axes Guideways to HRC 52 degrees.
Special Package Pricing: $15,750.00
Special Package Pricing includes:
-
ACER E-Mill™ 3VS-II
-
Newall 2-Axis DRO (12" x 30" travel, 0.0002" scale).
-
"LONGITUDINAL" Power Feed installed at the ACER Facility.
Ask About Your Schools' Discount! You can save!
ACER IS COMMITTED TO THE TRADES
ACER'S LARGE BORE LATHE:
ACER DYNAMIC 1760S
Just: $30,700.00
We offer this ACER 1760 for your consideration. We sell plenty of them and they are work horses.
These "LARGE BORE" HIGH SPEED PRECISION LATHES will make light of your machining applications.
FEATURES:
-
3.1" Spindle Bore & D1-8 Spindle Nose
-
7.7" HP Spindle Motor
-
12-Spindle Speed: 20~2,000 RPM.
-
Auto. Feed & Threading are interlocked to prevent simultaneous functions.
-
Hardened and Ground Meehanite Casting Bedway.
-
Hardened and Ground Gears and Shafts.
-
Thread Chasing Dial & Automatic Longitudinal Multiple Feed Stop.
STANDARD ACCESSORIES INCLUDE:
-
10" D1-8 3 JAW CHUCK.
-
STEADY REST BRONZE TIP 0.39"~6.29"
-
HALOGEN WORK LIGHT
-
CHIP GUARD FOR HAND
-
BUILT-IN COOLANT SYSTEM
-
FOUR WAY TOOL POST
-
4-POS. AUTO-FEED STOPPER RING.
-
TOOLBOX & TOOLS.
ACER 1440V E-LATHE
ACER's 1440V is a great learning lathe for schools or for shops who don't need an extra machining area.
We sell plenty of these lathes because of their quality, performances and price. Check it Out.
-
HEADSTOCK: All gears are made with chromium molydenum steel and are hardened & ground to its accuracy. A forced lubrication system lubricates all running gears and bearings within the headstock.
-
GEAR BOX: Unique two lever universal gear box offers a wide range of cutting capacity. All ranges can be reached by moving two levers and two dials.
-
SPINDLE: 1-1/2″ bored spindle is made from medium carbon steel and is induction hardened & ground to its final accuracy. It also has a two-point support with both bearings being taper roller.
-
APRON: Automatic feeding and threading in apron are fully interlocked to prevent simultaneous engagement of both functions.
-
TAILSTOCK: Keyed 1-7/16″ diametered quill is hardened to Rockwell C 55° & ground to its inspection accuracy.
-
Infinite variable speeds.
-
Oil level indicator.
-
24 volts safety control circuit with Allen Bradley switches.
-
Weigh in at 1,580 lbs.
-
Safety overload device.
-
Standard foot brake.
-
Forward/stop/reverse lever.
-
Half-nut engagement handle.
-
9″ wide bed way with FC-30 casting iron.
-
Hexagonal bed web.
-
Oil lubricated leadscrew.
-
Two-tone automotive paint.
LOCAL OHIO TRADE SCHOOL:
This local school in Ohio is a repeat customer and we truly value their business. Becoming a Rossi customer means you get our support- long after the sale.
They purchased 2 of the 3VS-II and
2 of the E-lathe 1440V for their machining lab.
Get yours before the school year starts!
Ashland, Ohio
This Ashland, Ohio manufacturer wanted a precision, but small lathe.
We suggested and sold them the ACER 1440V for their shop.
ACU-RITE SALE
Free Shipping in
The Continental USA
Buy an entire Acu-Rite Digital Readout System and Get Free Shipping if you are in the Continental USA.
With shipping costs skyrocketing, this is a real savings!
School Discounts!
Just in Time For School!
STEM IS AT OUR CORE
Stem is at our core as our history starts with the trades.
In the 1980's our founder, Mike Rossi, took the trade path, learning German-style of rebuilding and repairing machine tools.
The program required excellence, precision, and new machine tolerances. So it is no surprise that we support the manufacturing trades.
We benefitted from this career and helped a lot of manufacturing firms and shops along the way.
Take a look at a few ways you can upgrade your school's program and save money doing it.
GET 35% OFF LIST PRICE for any Acu-Rite digital readout systems, included are the DRO203 and DRO300.
-
There's no better way to train our future machinists than starting them on a manual machine with a digital readout system.
-
Training them on the digital readout system introduces them to the concepts, procedures, and programs that they will need to understand CNC machining.
Need to have a CNC to train on?
We have the solution. Acu-Rite's MILLPWR G2 offers CNC on a mill, teaching the CNC basics for a whole lot less than a CNC machine tool.
GET 25% OFF The List price of a MILLPWR G2 Control.
We are factory trained to install the control
JET BUY MORE SALE
Buy More, Do More, Save More!
This sale is a bundling sale. Buy 5 of any of the same SKU and get your 6th one FREE.
Get your support equipment for your entire shop or trade school programs.
Sale runs from Today until August 31st.
A GREAT DEAL For Schools!
EDWARDS' SALE:
Once again Edwards is offering a discount on all their machines, and accessories. From the Ironworker to Powerlink™ and all the attachments or accessories your shop or trade school might need, now is the time to buy!
Call Today!
