Blog Archives

The Value of a GREAT Customer.

1/11/2021

There's no better compliment to ones' work, both sales and services ,than a long-time valued customer who places their trust in you! It is our goal to have each customer to know that we want your trust, you business and we will follow our products, even after the sale!

   Pictured to the right is one of our first customers who dates back to our part-time days in the 80's. Nemes Machine Company is a excellent machine shop servicing many different customers- check them out. They are located on Evans Ave. in Akron, Ohio.

Looking for an excellent, worry-free machining center to up his capabilities, Joe Nemes approached us about our new Takumi machine tool line. Takumi machine tools sell themselves, but Mike Rossi who cut his teeth on rebuilding knows machine tools so his input and expertise about what machine will work the best made Joe Nemes' decision easy. And he likes that we do follow-up on all we sell. It's not one and done for us.

Joe isn't the only satisfied customer. Mr. Snyder of Snyder Fabrication in Mount Gilead, Ohio contacted us about upgrading his milling to the ACER MillpwrG2. Mr. Snyder had reached out to a bigger sales company, but ultimately chose us because of Mike's and Trent's expertise and they worked hard to answer all of his questions. Follow up is important to us. We don't sell and disappear; we want your repeat business. Mr. Snyder's recommendation is below. Please read on because we enjoy knowing that we helped him grow his business. What can we do for you? 866-622-4488 Mike or Trent can help

MR. TOM SNYDER OF SNYDER FABRICATION:

My small business recently purchased an Acer E-mill 3VK with an Acu-rite 3 axis CNC controller.
Prior to making the purchase I went to Rossi Machine to talk with them as I had a lot of questions.
I have never purchased a new machine before. The Rossi’s took the time to answer all of my questions and we spent a couple of hours just talking machining.
I soon became confident that these folks know their products and how to service them. I felt that these were folks that I could put my trust in.
   My new machine arrived and went into service without any problems. Our labor input for our parts were cut by about 60%.

After the machine was in service about a month a warranty issue popped up. I called Mike Rossi and he came to the shop in a little over one hour. He quickly located the problem with the controller. My machine was repaired and back in service with minimal down time.
Rossi Machinery is a company with honesty, integrity and the skills which I was looking for in a machinery dealer. You can depend on them, I do.

Tom Snyder, Snyder Magazine -Div. of Snyder Fabrication.

Thanks to all our customers - large and small, we appreciate your business and look forward to serving you in 2021. You make us a success and we want to help you to be a success too!

0 Comments

the acer e-head Product feature III.

1/8/2021

0 Comments

The ACER E-Head is an excellent replacement for the milling old milling heads.

They are a direct replacement for the Bridgeport milling heads and most imports.

Reasons to "Go E-Head™

The ease of use is only one reason.

The 3 HP. "Baldor" High Efficiency Motor for High Torque Output.
C.N.C. Vector Type AC Frequency Drive.
Infinite 0~4500 RPM Constant Spindle Speed.
1. Change in No Time: (0-4 sec.)
This head can run on Single or Three Phase without changing the wiring.
Low Maintenance, and downtime cost because of no plastic insert , key and moving pulley.
NO RPM changer break down but accurate reading on the RPM to prolong life.
Electronic and Mechanical Brake for a High Torque Output.
Boring and tapping application
Saves Energy Costs up to 35%.
ON SALE: $3,750.00 for the 3HP. Other options are extra.

On Sale : $3750.00 for the 3HP. **extra $450.00 for 480 volt.

Certainly one of our best selling products due to the cost, the efficiency that it brings you mill, and the warranty. Many times just changing your milling head to the E-Head™ will be enough to keep your mill going. If Not? Well pricing on the ACER E-Mill™ is excellent, provides a new machine with the extras that enhance your competitive edge. Call Mike to discuss changing your milling head. 866-622-4488 ext. 102. or email him at :
mrossi@rmscnc.com.

0 Comments

Gator chucks - holding masters!

1/7/2021

0 Comments

Our Anniversary Product Focus - Part II

A few months ago, while looking for quality accessories to complement our other product lines, we found Gator Chucks. Servicing the machine tool world for over 45 years and the quality products got our attention.
Gator Chucks' dedication to constant improvement, and finding the solutions for machine tool customers, aligned with our mission and quality standard here at Rossi Machinery Services!

Gator factory also pays a lot of attention to the selection of the high quality raw materials and cutting and measuring tools. Each chuck is being shipped with the QC certificate. Gator Chucks are warranted for up to two years. Below are some examples of the different chucks. We carry so many selections we encourage you to e-mail or call our sales staff to find out your great pricing, and selections. You can't go wrong with Gator Chucks. Mike: 419-281-4488 ext. 102 Toll Free: 866-622-4488 ext. 102 or mrossi@rmscnc.com. We are here to help!

Gator 5C Collet Chucks

Adjustable Lathe Chucks

Independent Lathe Chucks

Gator Centering Scroll Chucks

0 Comments

Celebrating 26 years of servicing ohio manufacturing: Part: I takumi cnc machines.

1/5/2021

0 Comments

January 6, 1995, Mike Rossi created a new business model for the manufacturing industry. From his experiences as a machine tool rebuilder, and service technician to his management role for a local manufacturing firm, Mike saw the need for quality products and services that would work within the customers' budgets and address their specific needs.
   He wanted a service and product company whose mission centers on the customer. Twenty-six years later, we are growing with the industry with our products and services, while keeping our customer-service focus. This is key to our success!
One of the finest product lines that we are proud of is our Takumi, USA lines.  Why?
This line of CNC machining centers carry the rugged build that our rebuilding experience likes. But it doesn't stop there.
  Takumi took this ruggedly built machine body and married it to the FANUC© Oi Control with innovations such as the Renishaw's innovation "Set and Inspect" View the video below the pictures.

Takumi and Rossi are a winning couple. We service all we sell - no subcontractors.

Takumi quality compares to any other CNC and we service all that we sell.

Excellent finishes, High Performances, Rugged build with pricing that works!

Our Technicians sell, support, service these great machine tools.

Unlike our competitors, our sales people understand how to work on these machines, setting us apart from our competitors.

Our Takumi Showroom. Come Visit Us. 866-622-4488

Takumi works to keep innovation as part of their offerings, another great reason to buy Takumi.
The parts (see above middle) produced are excellent, precise and are produced with the speed that makes your company much more competitive. ( Takumi can give you a time study as part of the standard quote) We can help with this as part of your exploration before purchasing.

Training: We go above and beyond with training, question/answers, drilling down on your specific needs and we follow up long after the sale. This is all part of our standard mission to be the best in customer service!

No cost, No obligation Quotes: As part of our business model, we provide all customers - established and prospective every opportunity to see the Takumi machines (in our facility), produce a part, and meet with our staff who are your sales, support, installers and factory service. Yes we send the same people to help you that worked with you on the sale.

0 Comments