LE BLOND BAND SAWS & DRILL PRESSES

LeBlond expands its product lines by offering a horizontal or vertical band saw as well as their drill press rounding out their product offerings. All with the LeBlond quality and performance, you can't go wrong with LeBlond.

LE BLOND HORIZONTAL BAND SAWS.

  • Manual or Variable Speed Band Saw

  • Main Drive Motor: 2.0 HP

  • Swiveling Vises

  • Electronics: 230V/460V/3ph/60Hz

  • Cutting Capacity at 90 Degrees = 9.84″

  • Cutting Capacity at 45 Degrees = 7.48″

  • Blade Size: 1.062″ x 0.035″ x 130″

  • Blade Speeds: 82 – 259 fpm

  • Shipping Dimensions: 74″ x 30″ x 44″

  • Weight: 794 lbs.

The LHS-10 is a horizontal band saw where the workpiece is held stationary while the blade is swung down to make the cut.

 

This band saw is ideally used to cut pipe, bar stock or other materials to length.

This band saw machine features manual or variable speed and has a main drive motor with 2.0 HP.

LeBlond horizontal saw

LEBLOND LVS 50

THE BASICS:

  • VERTICAL BAND SAW BLADE BUTT WELDER WITH INTEGRATED ANNEALING UNIT

  • BLADE SHEAR & GRINDER

  • BRUSH FOR CLEANING LOWER WHEEL DRIVE

  • LOW VOLTAGE LED WORK LIGHT

  • USE TO CUT COMPLEX SHAPES & ANGLES

 

THE FEATURES:

The LVS-50 vertical band saw, also called a contour saw, features a stationary blade while the workpiece is moved across it to cut out complex shapes and angles.

 

You can feed the workpiece into the band saw blade with a power assist mechanism.

 

The table size of the LVS-50 is 23.6″ x 19.6″ and features a blade length of 153.”

LeBlond Vertical Saw

LEBLOND DRILL PRESS: LDP-25VS

THE BASICS:

  • LDP-25VS

  • ELECTRICS: 230V/60Hz/3ph

  • DIGITAL TACHOMETER DISPLAY

  • TAPPING SYSTEM

  • LED WORK LIGHT

  • SAFETY GUARD WITH SHUT OFF MICRO SWITCH

 

THE FEATURES:

  • Floor Type, Base with Tank

  • 2 HP, 230v/60Hz/3ph

  • Drilling Capacity in Steel: 1″

  • Tapping Capacity: 5/8

  • Swing: 16″

  • Speed Taper: MT3

  • Spindle Travel: 5.3″

  • Quill Diameter: 2-7/16″

 

  • Column Diameter: 3.6″

  • Spindle Nose to Table: 23.8″

  • Spindle Nose to Base: 45.3″

  • Table Size: 18.3″ x 14.2″

  • Table Slot: 16mm

  • Base Size: 23″ x 15″

  • Spindle Speed: 15 – 3000 RPM

  • Coolant Pump: 1/8 HP

LEBLOND drill press LDP-25VS
Nemes Machine in Akron Ohio purchases a new gear head LeBlond lathe

LeBlond Ltd.

 
LeBlond has been a pillar for manual machine tools in turning since the 1800's & remains so.  Their quality & commitment to their manual and CNC machine tools makes them a great choice for any manufacturer. 



(Pictured: a new LeBlond placed in Akron, OH).