K.O. LEE SURFACE GRINDERS

K.O. LEE, offers the KOL40M industrial surface grinder, and the KOL60M tool cutter grinder.

Each grinder built with quality in mind, K.O. Lee makes a great choice in a grinder.

KOL40M INDUSTRIAL SURFACE GRINDER

LeBlond_-KOL40M GRINDER.jpg

Need to machine a tool with extraordinary precision? 

 

The K.O. Lee Industrial Surface Grinder is an excellent choice.

 

  • It has table that can be easily controlled from fine to rapid feed range for your various grinding requirements.

  • The wheelhead is designed so that it can be tilted easily to ± 15 degrees.

 

  • It can be swiveled 360 degrees on the horizontal plane.

Both of these features make it easy to set rake and relief angles.

  • The K.O. Lee industrial surface grinder spindle assembly is designed so that the spindle shaft is supported by two pairs of angular ball bearings; i.e. one pair at each end of the spindle support.

 

  • The spindle is grease lubricated for life and no additional lubrication is required.

  • The workhead can be positioned on the table as desired by the operator and can be swiveled accurately at any horizontal and vertical angle.

 

  • It has a taper hole in each end of the spindle; i.e. NT#50 / MT5.

  • In order to machine various grinding requirements, the table can be easily controlled from fine to rapid feed range.

 

  • The table feed mechanism is designed to be controlled by fingertip action.

 

  • The spring cushioned table dogs are used for both positioning the table as well as absorbing table return traverse shock.

 

  • The table ways are hardened, ground and anti-friction bearings are used. It swivels 120 degrees.

  • The right and left tailstocks can be easily positioned any place on the table.

 

  • The right tailstock has a retractable center for easy mounting and is mounting of the workpiece.

 

K.O.LEE: UNIVERSAL TOOL CUTTER AND GRINDER: KOL-60M

LEBLOND-Kol60m.jpg

THE STANDARD ACCESSORIES:

  • Electrics: 230V/3ph/60Hz *other voltages available

  • Diamond Dresser Holder

  • Wheel Guard Holders (Long & Short)

  • Center Gauge

  • Plain Tooth Rest Holder w/Blade

  • T-Wrench For Grinding Wheel Sleeve

  • Pin Wrench

  • Leveling Pads (Qty 3)

  • Reducing Collets (3 Sizes)

  • Grinding Wheels (7 Sizes)

  • Nut Wrenches (Qty 2)

  • Draw-in Bolt for Workhead and Washer

  • Workhead Spindle Center

  • Spindle Drive Belt

  • Double End Wrench

  • Tool Cabinet & Touch-up Paint

  • Right and Left Hand Tailstocks

  •  Workhead

  • Wheel Guards (Qty 4)

  • Collet Wrench

  • Universal Tooth Rest Plate & Blade Holder Ext.

  • Ejector Rod

  • Sleeve Extracting Bar

  • Micrometer Adjustable Tooth Rest

  • Plain Tooth Rest Holder

  • Grinding Wheel Sleeves (5 Sets)

  • Lockable Main Disconnect Switch

  • Driver

  • Washer for 1/8” Grinding Wheel

  • 4” Spindle Extension Wheel Sleeve and Collar

  • Operation Manual and Parts List

  • Allen Wrench

  • Ext. & Washers for Slit-Saw & Side Mill Cutters

Nemes-Leblond on floor-close up.jpg
LeBlond Ltd.  LeBlond has been a pillar in the machine tool world for turning since the 1800's & today K.O. Lee, part of LeBlond family of products, carry the quality customers need in grinding. LeBlond and K.O. Lee make purchasing new manual machine tool easy. Their quality spans over 100-years, making them a great choice.
(Pictured above a new LeBlond placed in Akron, OH).